SPC® , our long-lasting, dry solid-lubricant. Extremely thin, non-migrating coating creates the optimum and permanent coefficient of friction (c.o.f.) between two surfaces. Reduces metal surface wear by 50-80% and extends the life of metal parts (wheels/rollers, etc.) by minimum 3-5 times.
SPC® surface protective products provide a modern, efficient and labor-free method of protecting metal surfaces against wear, flaking and pitting in the most difficult applications areas – in some cases the only feasible method.
The products are a mixture of special components (without graphite) which bond strongly with the metal surfaces and create a pre-determined, optimum coefficient of friction for use on industrial equipment.
Long-lasting and self-applying, SPC® block units coat metal surfaces with a solid, non-migrating, protective film approximately 10 microns thick.
Why Choose us
SPC® out-performs conventional greases and oils in dusty environments.
Easy to install and maintenance-free.
Puis nostrud exercitation ullamco laboris nisi utm aliquip sed duis aute.
80%
Mechanical Wear Reduction
3-5 X
Opertating Life Increasement
SPC® Products and the impact on metal surfaces
This is our average customer feedback on the benefits of using SPC® products on their equipment. The data indicates that if installed, applied and maintained correctly the potential savings and technical benefits can be enormous by purchasing fewer spare parts and decreasing cost intensive downtimes.
Innovative Industrial Technology
SPC® blocks are supplied in various lengths and widths to coat all wheel, roller and rail surfaces. For very wide surfaces blocks can be mounted adjacent to each other or custom solutions can be offered. Heavy-duty, spring-loaded, stainless steel applicators are delivered with the blocks. Installation is usually quite simple and low cost. Robust and free of sensitive electric sensors, SPC® block units require no special maintenance . Worker training or modifications of your equipment and its operation are not necessary.
dMT- SPC® block units are most economical in applications where conventional lubricants (greases and oils) cannot be used, or should not be used, especially with risk of wheel slippage or in very dusty, high temperature or wet environments, due to resultant high material and labor costs.
SPC® Coating on a Rail Surface
Metal Surface with SPC®
Incididunt ut labore et dolore magna aliqua ut enim trud exercitation ullamco laboris nisi ut aliquip ex ea aute irure dolor in reprehenderit ex bea sed conseq uat ipsum duis sit amet.
Leading industrial solutions with machinery
Voluptatem acusantium doloremque laudant
Eperiam eaque ipsa quae ab illo inventore
Quasi architecto beatae vitae dicta sunt
Metal Surface without SPC®
Incididunt ut labore et dolore magna aliqua ut enim trud exercitation ullamco laboris nisi ut aliquip ex ea aute irure dolor in reprehenderit ex bea sed conseq uat ipsum duis sit amet.
Leading industrial solutions with machinery
Voluptatem acusantium doloremque laudant
Eperiam eaque ipsa quae ab illo inventore
Quasi architecto beatae vitae dicta sunt
Innovative Industrial Technology
SPC® blocks are supplied in various lengths and widths to coat all wheel, roller and rail surfaces. For very wide surfaces blocks can be mounted adjacent to each other or custom solutions can be offered. Heavy-duty, spring-loaded, stainless steel applicators are delivered with the blocks. Installation is usually quite simple and low cost. Robust and free of sensitive electric sensors, SPC® block units require no special maintenance . Worker training or modifications of your equipment and its operation are not necessary.
dMT- SPC® block units are most economical in applications where conventional lubricants (greases and oils) cannot be used, or should not be used, especially with risk of wheel slippage or in very dusty, high temperature or wet environments, due to resultant high material and labor costs.